Skip to content
Please CLICK HERE to register for dealer pricing!
Please CLICK HERE to register for dealer pricing!

V500.2

ALPHASONIK (V500.2) VENUM SERIES 1000 WATTS MAX 2-CHANNEL CAR AMP WITH POWER PLANT CHIP 4-WAY PROTECTION CIRCUITRY MULTI-CHANNEL BRIDGEABLE CLASS A/B WITH LOW LEVEL OUTPUTS & HIGH LEVEL INPUT

V500.2 BANNER

The VENUM Series of Amplifiers from Alphasonik combines technology, power and value for great sound and huge power. Featuring an extruded aluminum heat sink to dissipate heat from critical components, Ultra-Fi PWN MOSFET power supply, 4-way protection circuitry and RCA outputs to daisy chain multiple amps, the VENUM Series amplifiers deliver a complete audio listening experience.

HIGH LEVEL INPUTS EQUIPPED

High Level Inputs

The V500.2 amplifier has High Level Inputs for the added bonus of having the capability of using the source units speaker outputs. Having High Level Inputs is needed if your source unit doesn’t have Low Level Outputs. Tap into the rear decks speakers and you’re all set! Eliminating the need for a Hi to Low Converter.

LOW LEVEL PASSTHROUGH EQUIPPED

2 Channel In and Out RCAs

The VENUM Series amplifiers are equipped with RCA PASSTHROUGH. This feature is extremely helpful for multiple reasons. If you desire to add a second amplifier later on the future and don’t have enough RCA Outputs from your source unit. You can use the RCA PASSTHROUGH to get the signals needed to add on.

NICKEL PLATED TERMINAL BLOCK EQUIPPED

Terminal Blocks

The VENUM Series amplifiers is equipped with nickel plated terminal blocks. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.

EXTRUDED ALUMINUM HEATSINK EQUIPPED

V500.2 Extruded Aluminum Block

Keeping the amplifier cool increases efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So, we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency.

FEATURES:

  • 2 x 125W @ 4Ohms
  • 2 x 250W @ 2 Ohms
  • 2 x 500W @ 4 Ohms
  • Nickel plated terminals
  • Low level inputs
  • High level inputs
  • Variable bass boost: 0db -+12dB
  • Mil spec single-sided glass epoxy FR circuit board
  • 4 Way protection circuitry: Thermal, short circuit, overload and DC offset
  • Variable low pass crossover: 50Hz-250Hz
  • Variable high pass crossover: 50Hz-250Hz
  • Adjustable input sensitivity: 200mV-6V
  • Frequency Response: 10Hz - 45KHz
  • S/N Ratio: >90dB
  • THD: 0.05%
  • DIMENSIONS : (WxHxL) 9.2" x 2.3" x 10.0"