SWI-CAN2
by PAC
PAC (SWI-CAN2) INTERFACE ALLOWS YOU TO CONNECT PAC'S SWI-RC STEERING WHEEL CONTROL ADAPTER IN A VARIETY OF VEHICLES
Converts digital steering wheel control signals from the CANBUS to a voltage signal. For use with SWI-X, SWI-JACK, SWI-ECL/2 or SWI-PS.
- Retains Steering Wheel Control Functions when replacing the factory radio in a CAN Bus vehicle
- Must be used with SWI-X, SWI-JACK, SWI-ECL/2 or SWI-PS
- Retains programming even if the vehicle's battery is disconnected
COMPATIBILITY NOTES:
- The SWI-CAN2 module MUST be used in conjunction with another SWC module such as the SWI-X, SWI-JACK, SWI-PS or the SWI-ECL2
- The red wire on the SWI-CAN2 is an accessory OUTPUT. Damage may occur to the module if this wire is used as an accessory input.
- The SWI-CAN2 module MUST be used in conjunction with another SWC module such as the SWI-X, SWI-JACK, SWI-PS or the SWI-ECL2
- The red wire on the SWI-CAN2 is an accessory OUTPUT. Damage may occur to the module if this wire is used as an accessory input.
VEHICLE SPECIFICATIONS NOTE:
- 2006 BMW 3 Series: Compatible with the sedan only; not compatible with the coupe. The coupe does not have the necessary CAN bus signals.