MB QUART

NT1-120L


Specifications

 
  • CERTIFICATIONS
    IPX67, Conformal Coated, UVA Certified, CEA426B
  • RMS POWER HANDLING (CEA426B)
    70 watts
  • PEAK POWER HANDLING (CEA426B)
    140 watts
  • IMPEDANCE
    4 ohm
  • FREQUENCY RESPONSE +/- 10DB
    25-22kHz
  • FREQUENCY RESPONSE +/- 3DB
    55-20kHz
  • SENSITIVITY (1 WATT/1 METER)
    92dB
  • TOWER LENGTH
    11.2" (286mm)
  • HANG HEIGHT
    9.035" (229.5mm)
  • HEIGHT
    8.4" (215mm)
  • WIDTH
    8.4" (215mm)
  • WEIGHT
    4.9lbs (2.22kg)
  • Available in gray or black

 
Features & Benefits
 
  • MARINE CERTIFIED
    Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand
  • IPX67
    Tested to the highest Marine and Motorsports standards for resisting the elements
  • 1" PURE TITANIUM DOME TWEETER
    Very smooth musical response, high output with minimal required amp power
  • WATER RESISTANT SPIDER
    Woven red aramid fiber composite spider to stabilize the cone and voice coil in all musical situations. Armid fibers do not degrade over time and are not susceptible to temperature swings
  • 8" COMPOSITE POLY MIDRANGE
    UVA Protected, water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
  • HIGH TEMPERATURE VOICE COIL AND FORMER
    Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight
  • HIGH ENERGY Y30 MOTOR ASSEMBLY
    High energy strontium ferrite magnet for higher output with minimal amp power
  • MARINE CERTIFIED CROSSOVER
    Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection
  • INJECTION MOLDED ENCLOSURE
    Heavy duty ABS cast enclosure provides strength and improved bass response with increased volume while remaining very light weights
  • STEEL REINFORCED
    The mounting system between the pipe mount and the tower enclosure has an internal steel mounting plate for additional strength
  • CENTERING RING
    Centering ring allows the speakers to tip left/right when mounted to an arced mount
  • POWDER COATED DIE CAST MOUNTS
    Mounting hardware are Die Cast for strength and powder coated to resisted outdoor elements of sun, spray and dust
  • FLEXIBLE MOUNTING
    Eleven mounting hardware options from 1.5" to 2.75" included
  • ILLUMINATION
    Limitless color choices with color on, off, strobe and programmed “light shows” possible. Optional N1-RC required for control of lighting systems and to sync multiple illuminated speakers. Pre-programmed demo mode included on all lighted systems