STEREOPHONIC
RETROSOUND (STEREOPHONIC) 3 CHANNEL POWER AMPLIFIER
This unique 3-channel amplifier has two 65 watt RMS full-range front channels for mids and highs – plus a mono channel with up to 229 watts (2 ohms) for a subwoofer – allowing a complete audio system to be built using a single Stereophonic amplifier. Low-level RCA inputs allow Stereophonic to work with any aftermarket radio with RCA outputs. Stereophonic is bridgeable and 4 ohm and 2 ohm stable.
Stereophonic offers exceptional dynamic range for the best possible sound reproduction from your RetroSound® audio system. The full-range channels have a high-pass crossover for use with full-range speakers. The mono channel has a low-pass crossover to fine tune the bass frequencies for use with a subwoofer. A selectable input mode allows switching between 2 and 3 channel operation.
Stereophonic also features low current draw and Class D Digital circuitry. With exceptional dynamic range and low distortion, you'll get the best possible sound from your audio system.
PRODUCT HIGHLIGHTS:
- 3-Channel car amplifier
- 65 Watts RMS x 2 + 170 watts RMS x 1 at 4 ohms
- 90 Watts RMS x 2 + 229 watts RMS x 1 at 2 ohms
- 180 Watts RMS x 1 bridged at 4 ohms + 229 watts RMS x 1 at 2 ohms
- Class D amp technology
- Variable high-pass filter (40-400 Hz, 24 dB/octave) on front channels
- Variable low-pass filter (50-250 Hz, 24 dB/octave) on subwoofer channel
- Variable bass boost (0-12 dB at 50 Hz) on subwoofer channel
OTHER FEATURES:
- RCA preamp inputs
- Fuse rating : 40A x 1
- Wiring and hardware not included with amplifier
- 8-Gauge power and ground leads recommended
- Dimensions: 10-3/16"W x 1-7/8"H x 5-5/16"D
FEATURES & SPECS:
- RMS Power Output (Watts x Channels) : 65 x 2/ 229 x 1
- Peak Power Output (Watts x Channels) : N/A
- Power at 2 Ohms (Watts x Channels) : 90 x 2
- Bridged Power (Watts x Channels) : 180 x 1
- Minimum Impedance Bridged : 2
- Minimum Impedance Unbridged : 2
- Minimum Impedance : 2
- Best Frequency Response : 24-65k Hz
- THD at Rated RMS Power : 0.2%
- Signal to Noise Ratio : 95 dB
- Input Voltage : ---
SPECIFICATIONS:
- Low-Pass Crossover Frequency : 50-250 Hz
- Low-Pass Slope (dB/octave) : 24 dB/octave
- High-Pass Crossover Frequency : 40-400 Hz
- High-Pass Slope (dB/octave) : 24 dB/octave
- Bass Boost : 0-12 dB
- Bass Boost Frequency : 50 Hz
- Fan Cooled : No
- Fuse Rating : 40
- Speaker Level Inputs : No
- Preamp Outputs : No
- Width (inches) : 10-3/16
- Height (inches) : 1-7/8
- Depth (inches) : 5-5/16