V1000.4

ALPHASONIK (V1000.4) VENUM SERIES 2000 WATTS MAX 4-CHANNEL CAR AMP WITH POWER PLANT CHIP 4-WAY PROTECTION CIRCUITRY MULTI-CHANNEL BRIDGEABLE CLASS A/B WITH LOW LEVEL OUTPUTS & SELECTABLE INPUT SWITCH

The V3000.1 Monoblock Alphasonik Class D Amplifier Alphasonik's VENUM series combines technology, power and value for great sound and great power. Featuring a die-cast aluminum heatsink to dissipate heat from critical components with double-sided glass FR4 epoxy circuit board, 4-way protection circuitry, and RCA outputs, the Venum Series offers you a complete audio experience that will enhance your set up for years to come.

LOW LEVEL PASSTHROUGH EQUIPPED

The VENUM Series amplifiers are equipped with RCA PASSTHROUGH. This feature is extremely helpful for multiple reasons. If you desire to add a second amplifier later on the future and don’t have enough RCA Outputs from your source unit. You can use the RCA PASSTHROUGH to get the signals needed to add on.

LOW LEVEL INPUTS EQUIPPED

When your source unit does not have enough Low Level outputs, we got you covered! The VEMUM Amplifiers has a built-in switch so you can connect channel 1 and channel 2 then flip the MODE switch from 4 channels to 2 channels. Doing this will share the inputs to channel 3 and channel 4, eliminating the use of having to purchase a Y adapter and degrading the signal.

NICKEL PLATED TERMINAL BLOCK EQUIPPED

The VENUM Series amplifiers is equipped with nickel plated terminal blocks. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.

EXTRUDED ALUMINUM HEATSINK EQUIPPED

Keeping the amplifier cool increases efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So, we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency.

FEATURES:

• 1 x 750W @ 4Ohms
• 1 x 1500W @ 2 Ohms
• 1 x 3000W @ 1 Ohms
• Nickel plated terminals
• Low level inputs
• Remote bass knob included
• Variable bass boost: 0db -+12dB
• Mil spec single-sided glass epoxy FR circuit board
• 4 Way protection circuitry: Thermal, short circuit, overload and DC offset
• Variable low pass crossover: 40Hz-300Hz
• Variable input sensitivity: 200mV-6V
• Variable Subsonic Filter: 10Hz-40Hz
• Frequency Response: 10Hz - 300KHz
• S/N Ratio: >95dB
• THD: 0.10%
• Dimensions :  (WxHxL) 9.2" x 2.3" x 18.3"