Skip to content
Please CLICK HERE to register for dealer pricing!
Please CLICK HERE to register for dealer pricing!

NA2000.4

ALPHASONIK (NA2000.4) NEURON SERIES 2000 WATTS MAX 4 CHANNEL CAR AMP WITH 4-WAY PROTECTION CIRCUITRY MULTI-CHANNEL BRIDGEABLE CLASS A/B AMPLIFIER LOW & HIGH LEVEL INPUTS 

NA2000.4 BANNER

The NEURON Series of Amplifiers from Alphasonik will leave you astonished when you experience the power deliverance of these amplifiers and leave you in a conundrum on how it's even possible to achieve the power vs the almighty dollar. Not only did we accomplish the power that is needed and desired, but we didn't leave out any of the bells & whistles either. Things like 4-way protection circuitry and RCA throughputs to add more amplifiers. Check out the details below!

HIGH LEVEL INPUTS

High Level Inputs

High Level Inputs are an added bonus of having the capability of using the source units speaker outputs. Having High Level Inputs is needed if your source unit doesn’t have Low Level Outputs. Tap into the rear decks speakers and you’re all set! Eliminating the need for a Hi to Low Converter.

LOW LEVEL PASS THROUGH

4 Channel In and Out RCAs

The NA2000.4 is equipped with RCA PASS THROUGH. This feature is extremely helpful for multiple reasons. If you desire to add a second amplifier later on the future and don’t have enough RCA Outputs from your source unit. You can use the RCA PASS  THROUGH to get the signals needed to add on.

NICKEL PLATED TERMINAL BLOCK 

Terminal Blocks

Nickel plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.

EXTRUDED HEAT SINK

Heatsink

Keeping the amplifier cool increases efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So, we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency.

ABOUT THIS ITEM

  • This listing contains: (1) NA2000.4 2000 Watt Max 4-Channel Class A/B Amplifier Bridgable (1) Remote Bass Knob with Connector cable (1) Operations Manual (1) Mounting Hardware Set
  • 4 x 250W @ 4 Ohms 4 x 500W @ 2 Ohms 2 x 1000W @ 4 Ohm
  • Features: Nickel Plated Terminals Extruded Aluminum Heat Sink Low Level Input High Level Input Low Level Output Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz High-Pass Crossover: 60Hz - 1.2kHz Variable Input Sensitivity: 200mV - 6V 45Hz Bass Boost: 0 - 12dB ATC Fuse: 35 Amp x 2
  • Product Dimensions: 7.01" x 2.09" x 12.6" (178 x 53 x 320mm)

SPECIFICATIONS: 

  • RMS 4 Ohms :  250 Watts x 4
  • RMS 2 Ohms :  500 Watts x 4
  • RMS 4 Ohms Bridged : 1000 watts x 2
  • Terminals :  Nickel Plated
  • Input Signals :  Low Level & High Level Inputs
  • Output Signals :  Yes
  • Remote Bass Knob :  No
  • Amplifier Protection :  Thermal, Short Circuit, Overload and DC Offset
  • Low Pass Crossover :  50 Hz - 250Hz
  • High Pass Crossover :  60 Hz - 1.2kHz
  • Variable Input Sensitivity :  200mV - 6V
  • Frequency Response : 10Hz - 30kHz
  • Bass Boost :  0 - 12dB
  • S/N Ratio :  >90dB (+/-3dB)
  • Fuse Rating : ATC 35A x 2
  • Dimensions : 7.01" x 2.09" x 12.6" (178 x 53 x 320mm)